主要特點
本廠采用進口原料及先進機械設備生產，達到國際標準水平
硬度高，可雙面使用
利用高分子符合材料，韌度高可承受重復之施壓，平均每一單面可使用20-25天，可刨光滑平面使用。
可重復使用，非常環保
裁斷板表面磨損后，可以使用刨機將損壞之表面刨平后重復多次使用，亦可回收。
裁片品質佳，客戶滿意
由于裁板質地堅韌，裁刀壓力平均分布裁片的每一點上，可解決毛邊的問題，使生產線的每一片裁片都完美無缺。
延長裁斷機器與裁刀壽命
由于裁斷施壓平均，可延長裁斷機使用壽命，裁刀也較不易損壞，間接達到降低生產成本的目的。
規格齊全
規格：厚度3mm-5mm,寬度914mm以內，長度1828mm可依需求訂制。

FEATURES:
Excellent hardness, used double-sides and durably
Using high polymer materials providing high toughness and bear repeated pressure each Side can be used for20-25 days or planed into smooth and level surface.
Repeat and environmental utilization
The worn surface can be plane for repeat usage or recycle.
Excellent cutting quality and customers satisfaction
With the excellent hardness pressure of the cutting board be evenly distributed to the Cutting surface, eliminating the burr problem , making every cut perfect on the production line.
Prolonged service life of the cutting machine and cutting knife
Thanks to the even cutting pressure the cutter does not tend to break down much, eventually Will reduces the production cost.
Full specifications:
Thickness range from 3mm~50mm,width914mm,length1828mm.Also available for special orders. 

本報價根據市場的浮動進行調整
     備注：紅色板厚度按客戶需求可分為1.5CM-5CM